Gas forge burner

 

NEW BURNERS since 28 march 2014!

 

DF series:

DF (Air forced)

Gas forge burner (air forced) DF is intended for large forges and furnaces. It reaches the welding temperature in all large forges and melting temperature in large furnaces. It’s an excellent choice for professional use!

Burner Nozzle is a stepped nozzle made of T-304 stainless steel for higher efficiency and longer life (Burner Nozzle’s diameter is 38.2 mm). The forced air burner runs much hotter, heats faster, and allows you to adjust air to gas ratio for optimal heat and gas usage. The forced air burner is simple, it can be hooked up to any air compressor and by opening the ball valve adjusts the air to gas ratio creating a super hot flame. It also reduced fuel consumption and heating time.

Forced burner reach 435,436 BTU out put on 25 PSI !!!

Price with connection kit:

$139.99
Add to cart

Price without connection kit:

$99.99
Add to cart


DF-forced

DF-forced-grafik

 

DF (forced air) 1.8
ATM PSI BTU/Hr Lbs./Hr Kg/Hr. KW/H
0.06 1 87.087 4.03 1.82962 25.52267
0.13 2 123.16 5.7 2.5878 36.09462
0.2 3 150.84 6.99 3.17346 44.20683
0.27 4 174.174 8.07 3.66378 51.04535
0.34 5 194.733 9.02 4.09508 57.0706
0.68 10 275.394 12.76 5.79304 80.70999
1.02 15 337.287 15.62 7.09148 98.84904
1.36 20 389.466 18.04 8.19016 114.1412
1.7 25 435.436 20.17 9.15718 127.6137
2.04 30 476.996 22.09 10.02886 139.7937
2.38 35 515.215 23.86 10.83244 150.9946
2.72 40 550.788 25.51 11.58154 161.42
3.06 45 584.199 27.06 12.28524 171.2118
3.4 50 615.8 28.52 12.94808 180.4731
 

DFP burner

 

DFP – gas forge burner for small forges. It will reach welding temperature in all small forges and for very small furnaces. For beginners this burner is excellent choice!

Choke – With single thumb screw for quick adjustments of choke position. What does the choke do? The choke regulates the amount of air that is mixed with the propane during combustion. Burner Nozzle – 304 Stainless steel stepped nozzle for greater efficiency and longer life. (Burner Nozzle diameter 33,7 mm) DFP burner Powerful and efficient, this next generation burner is pre-tuned to develop a neutral flame leaving little oxygen for scaling. Our nozzle design is longer lasting and increases the burner’s efficiency. Operating pressure range from 1 – 45 PSI!!!

1 x DFP price with connection kit:

$109.99
Add to cart

1 x DFP Price without connection kit:

$69.99
Add to cart

2 x DFP price with connection kit no ball valve:

$179.99
Add to cart

2 x DFP price without connection kit no ball valve:

$139.99
Add to cart

2 x DFP price with connection kit and ball valve:

$199.99
Add to cart


2 x DFP price without connection kit but with ball valve:

$159.99
Add to cart

3 x DFP price with connection kit no ball valve:                                                

$229.99
Add to cart

3 x DFP price without connection kit no ball valve:                                                       

$189.99
Add to cart

3 x DFP price with connection kit and ball valves:                          

$269.99
Add to cart

3 x DFP price without connection kit but with ball valves:

$229.99
Add to cart


DFP gas burner

DFP 1.0
ATM PSI BTU/Hr Lbs./Hr Kg/Hr. KW/Hr
0.06 1 18.473 0.86 0.39044 5.413901
0.13 2 26.124 1.21 0.54934 7.656187
0.2 3 31.995 1.48 0.67192 9.376807
0.27 4 36.945 1.71 0.77634 10.82751
0.34 5 41.306 1.91 0.86714 12.10559
0.68 10 58.416 2.71 1.23034 17.12004
1.02 15 71.544 3.31 1.50274 20.96747
1.36 20 82.612 3.83 1.73882 24.21118
1.7 25 92.363 4.28 1.94312 27.06892
2.04 30 101.179 4.69 2.12926 29.65263
2.38 35 109.285 5.06 2.29724 32.02826
2.72 40 116.831 5.41 2.45614 34.23978
3.06 45 123.918 5.74 2.60596 36.31677
3.4 50 130.621 6.05 2.7467 38.28123
 

DFC burner

DFC – blacksmith forge burner for medium size forges furnaces and foundry raku kiln fire. It will reach welding temperature in all medium size forges, furnaces and foundry raku kiln. For professionals this burner is excellent choice! Choke – With single thumb screw for quick adjustments of choke position. What does the choke do? The choke regulates the amount of air that is mixed with the propane during combustion. Burner Nozzle – 304 Stainless steel stepped nozzle for greater efficiency and longer life. (Burner Nozzle diameter 45 mm) DFC burner Powerful and efficient, this next generation burner is pre-tuned to develop a neutral flame leaving little oxygen for scaling. Our nozzle design is longer lasting and increases the burner’s efficiency. Operating pressure range from 1 – 45 PSI!!! DFC burner reach 207,817 BTU out put on 25 PSI!!!

Price with connection kit:

$139.99
Add to cart

Price without connection kit:

$99.99
Add to cart


 

DFC

 

DFM – burner for big size foundry and kiln . For professionals this burner is excellent choice!

Choke – With single thumb screw for quick adjustments of choke position. What does the choke do? The choke regulates the amount of air that is mixed with the propane during combustion. Burner Nozzle – 304 Stainless steel stepped nozzle for greater efficiency and longer life. (Burner Nozzle diameter 59 mm) DFM burner Powerful and efficient, this next generation burner is pre-tuned to develop a neutral flame leaving little oxygen for scaling. Our nozzle design is longer lasting and increases the burner’s efficiency. Operating pressure range from 1 – 45 PSI!!!

Price with connection kit:

$164.99
Add to cart

Price without connection kit:

$119.99
Add to cart


DFM

DFM 1.8
ATM PSI BTU/Hr Lbs./Hr Kg/Hr. KW/H
0.06 1 59.818 2.77 1.25758 17.53092
0.13 2 84.595 3.92 1.77968 24.79234
0.2 3 103.607 4.8 2.1792 30.36421
0.27 4 119.635 5.54 2.51516 35.06155
0.34 5 133.756 6.19 2.81026 39.2
0.68 10 189.16 8.76 3.97704 55.43731
1.02 15 231.672 10.73 4.87142 67.89634
1.36 20 267.512 12.39 5.62506 78.40001
1.7 25 299.088 13.85 6.2879 87.65402
2.04 30 327.634 15.17 6.88718 96.02002
2.38 35 353.885 16.39 7.44106 103.7134
2.72 40 378.319 17.52 7.95408 110.8743
3.06 45 401.268 18.58 8.43532 117.6
3.4 50 422.974 19.59 8.89386 123.9614

How works DFP; DFC; DFM; burners

Lesson how right set up our gas burners


m4s0n501